| The tubular plate batteries are designed extremely strong and can withstand 1400 cycles of deep discharge at 80% discharge levels in its life time |
 |
| All the plate grids in flat plates and the spines in the Tubular plates are cast in automated high-pressure machine with maximum 2.5% antimony alloy. Every plate and every cell element is carefully weighed to achieve uniformity within a close tolerance level. Very low internal resistance is achieved by using extra large inter cell connection which are tested 100% in the assembly line and also by high porosity PE (Poly-Ethylene) separators. Tough and high tensile poly-ethylene pocket separators are used in place of cheap PVC separators that are used by many others. This adds to reliability under abusive conditions and stops failure from short circuits. |
|
Key Advantages:
|
|
 Up to 10 years of service life. |
|
| Very-very low water loss. |
|
| Very-very low self-discharge loss. Due to this, the battery can be stored in charged condition, for very long time without getting discharged. |
|
| All batteries of same type will have very uniform internal resistance. Large numbers can be connected in series or parallel without any danger of misbalance within the battery bank. |
|
| Very low internal resistance gives you high voltage on discharge and extra back up on load. You get longer back up in a Luminous Digital Power Battery as compared with any other battery of same capacity, much better value for money. |
|
| Ceramic vent plugs arrest evaporation loss of water. |
|
| The tubular batteries are used in the following applications: UPS systems where power demand is for longer period, Inverters under same conditions, Solar PV systems, Telecom applications - both Base stations and at Repeater stations, Backup systems in Power stations and Sub stations and Switch yards, Railways signaling use, etc. |
|
| To view the Technical Specifications Click Here |
Line Card