Have you ever thought of earning money by generating electricity?
Luminous presents to you its NXi Grid Tie Inverter. This power inverter can feed power directly to the grid from solar panels. It is designed to rapidly disconnect from the grid If the power grid goes down which is known as anti-islanding feature.
In short, with a solar panel system that has NXi grid-tie inverter, you can produce your own electricity for running loads and, at the same time, sell extra electricity to the power distribution company.
Luminous NXi grid-tie inverter range is a next-generation product. It comes with MPPT charge controllers allowing you to install multiple solar panels strings in series-parallel combination for maximum space utilization. These MPPT charge controllers are highly efficient, delivering 99.9% efficacy, thereby maximizing the solar energy generation through solar panels.
It is also an IP65 product that makes it completely dust and waterproof, allowing you to install it outdoors. It comes with remote monitoring system which can be accessed through a GSM or WIFI dongle so that you can monitor the system performance from anywhere in the world with your smartphone app. There are multiple safeguards for:
Benefits of Luminous NXi Grid Tie Inverter for PV System:
1. The transformer-less architecture allows Luminous GTI to produce full solar power with more than 97 percent efficiency.
2. IP65 Security- Being an IP 65 approved product, Luminous GTI is also ideal for outdoor installation. It will operate in extreme weather conditions, such as dust, heavy rain, intense heat, or excessive cold.
3. Anti-Islanding protection- If the grid is broken, this inverter stops sending power to the grid, thereby ensuring total safety for linemen at work.
4.Remote Monitoring System- Users can connect via Wi-Fi or GSM dongle to Luminous GTI and access mobile information and diagnostics. BIS Certified Grid Tie Inverter as per IS/IEC standards.
Luminous NXi Grid Tie Inverter Selection Process:
It comes in both single and three phase available in capacities from 1kW to 80kW. We have listed a capacity chart below to help you pick the most suitable grid-tie system as needed:
|Supply Type (Phase)||KW Rating||Model Name||Max Solar Panel Capacity|
|Single Phase||1 KW2 KW 3KW 4KW 5KW||NXi 110NXi 120 NXi 130NXi 140 NXi 150||1.2kW2.3kW 3.5kW 4.6kW 5.8kW|
|Three Phase||5 KW6 KW 8KW 10KW 12KW 15KW 20KW 25KW 30KW 50KW 60KW||Nxi305Nxi306 Nxi308Nxi310 Nxi312 Nxi315Nxi320Nxi325Nxi330Nxi350Nxi360||6kW7.2kW 9.6kW 12kW 14.5kW 18kW 24kW28kW34kW55kW72kW|
How to install NXi Grid Tie system?
Step1- Select the right location for the inverter installation. Keep in mind that NXi grid-tie inverters should be installed in a well-ventilated area where the ambient temperature ranges from minus 25 degrees centigrade to 50 degrees centigrade. The inverter should be mounted in a vertical position with a clearance between the ground, ceiling, and sidewalls of at least 500 millimeters. If more than one grid-tie inverter is to be installed, a minimum of 500-millimeter clearance should be kept between them too.
Step2- To mount the inverter on the wall, you'll need to secure the mounting bracket on the wall first. Ensure it is properly hooked.
Step3- This range of inverters is designed for electrical connections without removing the cover. Hence, various ports for electrical connections are provided at the bottom of the Luminous NXi grid-tie inverter. Before you connect the inverter to the solar panels, make sure that the MPPT voltage range is within the inverter's limit with a maximum of 500 volts for single-phase maximum 1000 volts for three-phase inverters.
First, turn off the DC MCB in the DC distribution box and connect the string wires from all the solar panels to the distribution box. Take the output from the DC MCB to the positive and negative terminals of the DC on the inverter.
Step4- To make the mains connections first switch off the grid supply means AC supply. Now, switch off the AC MCB in the AC distribution box and connect grid output wire from the NXi grid-tie inverter to the AC distribution box.
Step5- Link the GSM or WIFI dongle to the grid-tie inverter by inserting it properly into the inverter's communications COMM PORT after all the electrical connections are made.
Frequently Asked Questions:
1. What are the features of NXi Grid Tie inverter?
2. What are the applications of the Luminous NXi grid tie inverter?
Luminous NXi grid-tie range of inverters are the perfect solar solution for your home, office, commercial & institutional buildings, factories, warehouses and other workplaces.